A reliable auger motor is essential for the smooth operation of a pellet stove, as it controls the steady delivery of pellets to the burn pot.
Choosing the right auger motor ensures consistent heating, improved efficiency, and fewer performance issues over time.
With many options available, understanding key features such as compatibility, torque strength, rotation speed, and durability can make installation and replacement much easier.
This installation guide highlights the top 10 best auger motors for pellet stoves, helping homeowners and technicians make informed decisions.
Proper selection and correct installation not only extend stove lifespan but also enhance safety, reduce maintenance needs, and deliver dependable warmth throughout the heating season.
10. Criditpid PU-047040 Auger Motor
The PU‑047040 auger motor is the exact OEM replacement for Englander pellet stoves such as the 25‑PDVC, 55‑SHP10, 25‑PDV and the 10‑CPM multi‑fuel model.
Each pack ships two 1 RPM counter‑clockwise motors, each wired with a 20‑inch cable and both ¼″ male and female spade terminals for flexible installation.
Rated at 120 V, 1.03 A, 60 Hz, the motor delivers steady, low‑speed torque that feeds pellets smoothly without jitter.
Constructed from stainless‑steel housing, it resists corrosion and wear, ensuring long‑term reliability.
The design is quiet, energy‑efficient and matches the original part number PU‑047040, so you can restore full auger performance in minutes. A 1‑year warranty backs the quality, giving peace of mind during the cold season.
Pros
- Easy 20″ wire with dual connectors
- Quiet, low‑speed operation
- Durable stainless‑steel construction
- Direct OEM fit, no modifications
- Includes two motors per pack
Cons
- Only counter‑clockwise rotation
- Requires 120 V supply only
- Limited to compatible Englander models
9. KP60 Pellet Stove Auger Motor by US Stove
The KP60 Pellet Stove Auger Motor (part # 80781) is the perfect drop‑in replacement for anyone looking to restore reliable feed performance to their pellet stove.
Engineered to match the original specifications of both the King KP60 and the US Stove Company KP60‑XH, this motor fits seamlessly into existing installations without any need for adapters or rewiring.
It also serves as a direct substitute for part # 64TYD‑GF3, ensuring you have a single, versatile solution for multiple model numbers.
Backed by a USA‑based seller, you’ll benefit from responsive, seven‑days‑a‑week customer support that can answer questions, troubleshoot issues, and ship replacements quickly.
Whether you’re a DIY enthusiast or a professional installer, this motor delivers the torque and durability needed to keep pellets moving smoothly, reducing downtime and extending the life of your stove.
Pros
- Exact OEM fit, no modifications required
- Works with King KP60 and US Stove KP60‑XH
- Direct replacement for part # 64TYD‑GF3
- US‑based seller, 7‑day support line
- Reliable torque for consistent pellet feed
Cons
- Limited to compatible KP60 models
- Professional installation recommended
- Not a universal auger motor
8. Breckwell CE-017 Auger Motor
The Breckwell 1 RPM Clockwise Auger Feed Motor, Gearbox Assembly (CE‑017) is the heart of a pellet stove’s feeding system.
Engineered to deliver a steady 1 RPM clockwise rotation, it precisely meters pellets into the combustion chamber, ensuring clean, efficient burn and consistent heat output.
The sealed ball‑bearing design protects the motor from dust and moisture, giving it a reputation for unmatched durability and long‑term reliability—one of the best‑rated auger assemblies on the market.
Designed for versatility, this unit fits a wide range of Breckwell models such as the P22 Maverick, P23 Sonora, P1000 Big E, and many others, making it an ideal replacement part.
Its specifications include 120 V AC power, a 3/8‑inch diameter × 1 1/8‑inch length shaft, and a pre‑drilled hole for easy installation.
When you purchase through ESESStoves you also receive free technical support and a 1‑year warranty, giving you confidence and peace of mind in every heating season.
Pros
- Precise 1 RPM feed control
- Sealed ball‑bearing for longevity
- Broad compatibility across Breckwell models
- Easy install with pre‑drilled hole
- 1‑year warranty plus tech support
Cons
- Requires 120 V AC outlet
- Specific to clockwise rotation only
- Not universal for non‑Breckwell stoves
7. Englander Pellet Stove Auger Feed System
A complete retrofit kit that transforms your Englander pellet stove into a hands‑free, reliable heating solution.
The package ships with a high‑torque auger motor, precision‑machined shaft, durable bearings, and all necessary hardware for a quick, tool‑free installation.
Designed to match the original factory specifications, the system delivers consistent pellet flow, reduces manual loading, and helps maintain optimal combustion efficiency.
The robust motor operates quietly even under heavy load, while the sealed bearings protect against dust and moisture for long‑term reliability.
Whether you’re upgrading an older unit or replacing a worn‑out feed mechanism, this all‑in‑one kit provides everything you need to get back to effortless, clean heat in minutes.
Pros
- Easy, tool‑free installation
- Quiet, high‑torque motor
- Consistent pellet feeding
- Durable, sealed bearings
- Restores factory efficiency
Cons
- Requires compatible Englander model
- Motor may need electrical upgrade
- No optional remote control included
6. Adviace 80488 Auger Motor
The Adviace 80488 Auger/Agitator Motor is engineered for reliability and seamless integration with a wide range of pellet stoves.
Its 1 RPM counter‑clockwise rotation (when facing the shaft) delivers steady feed, while the precision‑drilled hole in the shaft matches OEM specifications for a perfect fit.
With 20 in. of wire leads and both male and female spade connectors, installation is quick and adaptable to any stove wiring configuration.
The motor runs on 110 V, 60 Hz, drawing just 1.03 A, and features a robust 3/8” × 1‑1/8” flat‑edge shaft that secures easily with a set collar.
Compatibility spans Vogelzang, American Harvest, Ashley/King, US Stove, USSC, and Breckwell models, making it a versatile replacement part.
Backed by a 1‑year warranty, this motor promises durability and peace of mind for your heating system.
Pros
- Broad compatibility across major stove brands
- Easy installation with dual spade connectors
- Low power draw for energy efficiency
- Precision‑drilled shaft hole for perfect fit
- One‑year warranty ensures reliability
Cons
- Requires 110 V power source only
- Limited to counter‑clockwise rotation
- Shaft size may need specific collar
5. Hipoilk PU-047040 Auger Motor
The Hipoilk PU‑047040 auger motor is the perfect replacement for a wide range of Englander pellet stoves.
Powered by 120 V at just 1.03 A, this motor delivers a steady 1 RPM rotation in a reliable counter‑clockwise direction, ensuring even fuel distribution and consistent heat output.
The 20‑inch wire comes with both ¼‑inch male and female spade terminals, making wiring a breeze regardless of your stove’s configuration.
Constructed from stainless‑steel, the motor mounts securely to the auger shaft and operates quietly while providing the torque needed for smooth feeding.
Packaged as a two‑piece set, you can replace both top and bottom feed motors at once, getting your stove back in service in minutes.
Compatibility spans dozens of Englander models—from the 25‑PDVC and 55‑SHP10 series to the 25‑PAF and 55‑TRP25 lines—so you can count on a perfect fit for most installations.
Pros
- Easy 20‑inch wiring with dual connectors
- Quiet, steady 1 RPM rotation
- Stainless‑steel construction for durability
- Works with most Englander pellet stoves
- Two‑pack replaces top and bottom motors
Cons
- Only counter‑clockwise rotation
- Requires 120 V, 60 Hz supply
- Limited to compatible Englander models
4. Whitfield Auger Rebuild Kit
The Auger System Rebuild Kit from Stove Parts for Less is the essential upgrade for Whitfield pellet stoves and inserts—and it also fits Lennox Montage models.
Each kit comes complete with every component needed to restore smooth, reliable pellet feeding: an Auger Motor (12046300), Auger Shaft (11756300), Auger Bushing (12021101), Auger End Plate (17250241), Silicone Auger End Plate Gasket (61050003), Auger Collar with Set Screw (12041300), and an Upper Auger Bushing (12051100).
By replacing worn parts with this OEM‑spec collection, you eliminate feed jams, improve combustion efficiency, and extend the life of your stove’s burn pot.
The kit’s silicone gasket provides a tight seal against heat and debris, while the precision‑machined bushing and shaft ensure quiet, consistent operation.
Installation is straightforward—just swap the old pieces for the new ones and you’ll notice a smoother, quieter pellet flow within minutes.
Pros
- Complete OEM‑matched component set
- Restores smooth pellet feed
- Compatible with Whitfield & Lennox
- Reduces jam risk
- Easy DIY installation
Cons
- Requires basic tool set
- Not a universal fit for other brands
- Kit replaces multiple parts, higher upfront cost
3. Englander Pellet Stove Auger Feed Motor
The Pellethead Auger Feed Motor is engineered to keep your Englander pellet stove feeding smoothly and efficiently.
With a compact 3/8‑in. diameter × 1 1/8‑in. shaft, it runs on standard 120 V AC, 60 Hz power and turns counter‑clockwise at a steady 1 RPM. This precise speed delivers consistent pellet delivery, maximizing heat output while minimizing waste.
Designed as a high‑quality aftermarket replacement, the motor directly substitutes the original PU‑047040 and B4415UI parts, restoring full functionality without the need for a full stove overhaul.
Its compatibility spans a broad range of Englander models—including the 25‑PDV, 55‑SHP22, American Heritage, and many others—making it a versatile fix for most households. Backed by a 1‑year warranty, you can trust this motor to perform reliably season after season.
Whether you’re replacing a failed unit or upgrading for smoother operation, this motor offers the durability and precision needed for dependable pellet heating.
Pros
- Precise 1 RPM feed rate
- Counter‑clockwise rotation matches OEM design
- Fits numerous Englander models
- Easy direct‑replace installation
- 1‑year warranty for peace of mind
Cons
- Requires 120 V AC supply
- Only counter‑clockwise rotation available
- Not compatible with non‑Englander stoves
2. Pellethead Englander Auger Motor Replacement
A reliable upgrade for your Englander pellet stove, the PU‑047040 Auger Motor Replacement fits a wide range of models—including England Stove Works, Summers Heat, and Timber Ridge—making it a versatile choice for both pellet‑only and multi‑fuel units.
The motor arrives fully assembled, so you can swap it out in minutes using the simple plug‑and‑play wire leads. It drives the auger counter‑clockwise at a steady 1 RPM, powered by 110 V and drawing just 1.03 A, and can be easily reversed if a clockwise rotation is required.
Designed to stay cool, this motor runs cooler than the original and eliminates the need for a rear plastic cooling fan, reducing heat‑related wear.
Its robust construction delivers smooth, dependable feed performance, and the 12‑inch wire lead connectors keep installation tidy.
Backed by a 1‑year warranty, the PU‑047040 offers peace of mind and long‑lasting service for your heating system.
Pros
- Works with multiple stove brands
- Plug‑and‑play, no tools required
- Counter‑clockwise rotation at 1 RPM
- Runs cooler, no fan needed
- 1‑year warranty for peace of mind
Cons
- Only 12‑inch wire length
- Requires 110 V power source
- Not pre‑wired for clockwise only
1. Pellethead 2 Pack for Englander Auger Motor
The Pellethead 2‑Pack replaces the top and bottom auger motors on Englander 1 RPM pellet stoves with a cooler‑running, fan‑free design.
Engineered to match the original PU‑047040 / B4415UI / PH‑CCW1 specifications, each 120 V motor delivers the same 1 RPM torque while eliminating the noisy rear plastic cooling fan.
Installation is faster than ever thanks to the 12‑inch pre‑wired leads that plug directly into the stove’s connectors—no need to match individual wires, just snap them in place.
Because the motor runs at a lower temperature, it reduces wear on surrounding components and extends overall system life.
The pack includes both the top‑and‑bottom units, giving you a complete upgrade in a single, cost‑effective purchase.
Pros
- Cooler operation without rear fan
- Easy plug‑in 12″ wire leads
- Exact OEM torque and speed
- 2‑pack covers both auger positions
- Compatible with PU‑047040 part numbers
Cons
- Requires 120 V power supply
- Not suitable for non‑Englander models
- No fan may affect extreme heat environments
Frequently Asked Questions
What is an auger motor and why is it essential for a pellet stove?
The auger motor drives the screw‑type feed system that transports pellets from the hopper to the burn pot. It ensures a steady, controlled fuel flow, which is critical for maintaining consistent heat output, efficient combustion, and preventing stove shutdowns due to fuel starvation.
How do I choose the right auger motor for my pellet stove model?
- Check the stove’s specifications – Look for the required torque (Nm) and voltage (usually 120 V AC).
- Match the auger size – The motor must fit the existing auger diameter (commonly ½‑inch or ¾‑inch).
- Consider the motor type –
- Brushless DC motors are quieter and have a longer lifespan.
- AC induction motors are often less expensive but may be noisier.
- Verify compatibility – Confirm that the motor’s mounting brackets and shaft length align with your stove’s frame.
When in doubt, consult the stove’s manual or contact the manufacturer for the recommended part number.
What are the key steps in the installation guide for a top auger motor?
- Safety first – Turn off the stove, disconnect power, and let the unit cool completely.
- Remove the old motor
- Unplug the motor wiring harness.
- Unscrew the mounting bolts and gently slide the motor out of the auger housing.
Conclusion
Choosing the right auger motor and following a clear installation guide can dramatically improve the reliability, efficiency, and safety of any pellet stove setup.
By focusing on factors such as torque, durability, compatibility, and ease of maintenance, you ensure consistent fuel delivery and reduce the risk of downtime.
Proper alignment, secure mounting, and thorough testing during installation help prevent common issues while extending the lifespan of both the motor and the stove.
Ultimately, investing time in selecting a quality motor and adhering to best‑practice installation steps pays off in smoother operation, lower fuel consumption, and greater peace of mind during the heating season.
