Protecting your log splitter is essential if you want reliable performance season after season. Exposure to rain, snow, dust, and harsh sunlight can quickly damage critical components, leading to rust, fading, and mechanical issues.
A high quality waterproof cover acts as a strong barrier against the elements while keeping your equipment clean and ready for use.
For heavy duty work and long term storage, durability, proper fit, and weather resistance matter most.
In this guide, we highlight the top options designed to safeguard your log splitter, extend its lifespan, and give you peace of mind in any climate conditions worldwide.
10. Log Splitter Cover for Husqvarna 15-45ton
The GOCTOKE Heavy‑Duty Log Splitter Cover is built to keep your 15‑45 ton splitter safe from the elements year‑round. Crafted from 600 D polyester Oxford fabric, it resists water, stains, UV rays and tears, so rain, bird droppings or harsh sunlight won’t dull its appearance.
Two detachable tent stakes anchor the cover firmly, providing camp‑level wind resistance that prevents the cover from blowing away during storms.
Quick‑install hidden waterproof zippers and hand straps at both sides and the tail let you pull the cover on or off in seconds. Integrated nylon mesh vents on each side release moisture and heat, keeping the splitter dry and cool after rain or humid days.
The generous 94 × 49 × 41 in dimensions fit gas or electric splitters from 20 ton up to 60 ton models, and a compact storage bag folds the cover away neatly when not in use.
Pros
- Rugged 600 D Oxford fabric protection
- Detachable stakes for wind‑proof stability
- Hidden waterproof zipper speeds setup
- Mesh vents eliminate moisture buildup
- Fits a wide range of splitters
Cons
- Stakes require firm ground
- Slightly bulky when folded
- Zipper may need occasional lubrication
9. Champion Power 30-37 Ton Log Splitter Cover
The Champion Power Equipment Weather‑Resistant Storage Cover is engineered to shield your 30‑37‑ton log splitter from the elements, extending its life and keeping performance consistent.
Crafted from a tough polyester exterior, the cover repels sun‑damage, rain, snow, and dust, ensuring a dry, clean machine when not in use. An adjustable drawstring creates a snug, secure fit that stays in place even on windy days.
Designed specifically for 30‑35‑ton Champion splitters—whether you own a model with or without a built‑in log splitter—the cover slips on quickly, providing hassle‑free protection during storage or off‑season periods.
Its water‑resistant construction also helps prevent rust and corrosion, making it a smart investment for anyone who relies on a heavy‑duty splitter for firewood or commercial work.
Pros
- Tough polyester resists sun and rain
- Adjustable drawstring ensures a tight fit
- Quick, easy installation over splitter
- Compatible with 30‑35‑ton models
- Protects against rust and corrosion
Cons
- May be bulky to fold
- Not machine washable
- Limited color options
8. Coleman SplitMaster Log Splitter Cover
The Heavy Duty Log Splitter Cover is engineered for all‑season protection, keeping your 15–37 ton gas or electric splitter safe from dust, rain, snow, sap, and UV exposure.
Crafted from upgraded 420D polyester Oxford fabric with a waterproof PU coating, the cover delivers tear‑resistant strength and stability even in harsh outdoor conditions.
Its generous 83″ L × 45″ W × 39″ H dimensions accommodate most standard splitters—just double‑check your machine’s size for a perfect fit. Three adjustable drawstrings at the bottom create a snug, wind‑proof seal, eliminating flapping in gusty weather.
When it’s time to clean, simply rinse or wipe the surface; the quick‑dry material restores a like‑new appearance in seconds. This easy‑install, low‑maintenance solution ensures your splitter stays dry, clean, and ready for the next job, season after season.
Pros
- Waterproof, all‑season protection
- Universal fit for 15–37 ton splitters
- Adjustable drawstring for wind‑proof seal
- Durable 420D Oxford construction
- Simple rinse‑and‑dry cleaning
Cons
- Must verify machine dimensions
- Not insulated for extreme cold
- No built‑in storage pockets
7. YANGSHILEI Log Splitter Cover
YANGSHILEI Log Splitter Covers are built for the toughest outdoor conditions. Made from heavy‑duty 900D polyester Oxford fabric with an inner PU coating, the cover offers waterproof and UV‑resistant protection that helps prevent premature aging and rust on your gas or electric splitter.
The generous 94 ”L × 49 ”W × 42 ”H” dimensions accommodate 22‑40‑ton machines (and even up to 60 tons), fully shielding the frame, engine, and tires. Four sturdy attachment straps secure the cover in place, resisting strong gusts so it won’t blow away.
Padded handles make setup and removal quick, while large ventilation openings promote airflow, draining moisture and reducing condensation inside. Backed by a one‑year warranty, YANGSHILEI stands behind its product with responsive after‑sales support.
Pros
- Heavy‑duty 900D Oxford fabric
- Waterproof, UV‑resistant PU coating
- Fits large 22‑40‑ton splitters
- Four straps secure against wind
- Vented design prevents moisture buildup
Cons
- Slightly bulky when folded
- May require extra storage space
- Not suitable for electric splitters under 25 tons
6. Champion 15-27 Ton Log Splitter Cover
The Champion Weather‑Resistant Storage Cover is built to keep your 15‑27‑ton log splitter in top condition when it’s not in use.
A rugged polyester exterior shields the machine from harsh UV rays, rain, snow, and dust, extending its lifespan and maintaining performance. The cover’s water‑resistant fabric lets moisture bead off, while the adjustable drawstring cinches tightly around the splitter, preventing wind from blowing it loose.
Designed specifically for Champion splitters, the cover fits models both with and without log catchers, offering a versatile solution for any workshop or outdoor site.
Its generous cut‑and‑seal design lets you slip the cover over the unit in seconds, so you can protect your investment without a lengthy setup. Whether you store the splitter in a garage, shed, or open yard, this cover provides a reliable barrier against the elements, keeping the machinery ready for the next job.
Pros
- Tough polyester resists sun and rain
- Adjustable drawstring ensures a snug fit
- Compatible with catchers or bare units
- Quick‑fit design saves time
- Ideal for 15‑27‑ton splitters
Cons
- May need occasional tightening
- Not a full‑proof seal against heavy snow
- Requires proper sizing for optimal fit
5. HICOVER Log Splitter Cover 1200D Oxford
The HICOVER Log Splitter Cover is built for the toughest outdoor conditions. Crafted from 1200‑D Oxford PVC fabric with double‑needle stitching and waterproof tape on every critical seam, it shields your 15‑45 ton gas or electric splitter from rain, snow, UV rays, and humidity.
The rear waterproof zipper provides smart, quick access—no need to pull the whole cover off when you need tools or a quick check. Two reflective strips boost nighttime visibility, while ventilation ports keep condensation down, protecting internal components.
An elastic hem and sturdy buckles at the bottom and back lock the cover in place, resisting strong winds. The package includes a zippered storage bag for easy transport, and the anti‑aging fabric ensures more than a year of reliable protection—far longer than typical lightweight covers.
Pros
- Heavy‑duty waterproof 1200D fabric
- Rear zip for quick, dry access
- Reflective strips for night safety
- Ventilation ports reduce condensation
- Secure fit with elastic hem and buckles
Cons
- Slightly larger for tight spaces
- Requires occasional zip lubrication
- May need extra straps in extreme winds
4. STAYDEN Log Splitter Cover
The STAYDEN Log Splitter Cover is engineered for 15‑45 ton splitters, delivering all‑weather protection that lets you work year‑round without worrying about rust, rain, or dust.
Constructed from rugged 1200 D Oxford cloth laminated with PVC, the cover resists tears and abrasion while the internal waterproof stickers keep moisture out.
A clever bottom drawstring and head‑to‑tail buckle system secure the cover tightly, so you can toss it over the machine in seconds and pull the drawstring to lock it in place.
Mesh vents promote airflow, preventing condensation and the resulting rust that often plagues splitters exposed to temperature swings. Installation is a breeze—simply slide the cover over the unit, fasten the buckles, and tighten the drawstring.
When you’re done, pull the string again for a snug fit that stays put even in windy conditions. Whether you store your splitter on the lot or transport it to a remote job site, this cover offers durable, water‑proof, and rust‑resistant shielding that extends the life of your equipment.
Pros
- Tear‑resistant 1200 D Oxford fabric for heavy‑duty protection
–
3. Mionovity 1200D Log Splitter Cover
Mionovity’s 1200D Log Splitter Cover is built for the toughest work sites. Crafted from heavy‑duty 1200D polyester Oxford, the fabric resists tears and UV rays while the inner PU coating makes it fully waterproof, keeping your splitter dry and protected from premature aging.
A soft cotton lining cushions the machine, reducing friction and preventing scratches on the chassis and tires.
The oversized dimensions—up to 89 ”L × 45 ”W × 39 ”H—fit 15‑45 ton gas or electric splitters, including models from Oregon, Troy‑Bilt, MTD, Huskee and more.
Double‑layer reinforcement and a magic‑tape front closure create a wind‑proof barrier, while adjustable elastic hems and reinforced straps lock the cover securely in gusty conditions.
Ventilation holes and high‑visibility reflective strips add safety and help prevent condensation, ensuring the splitter stays dry and ready for the next load.
Pros
- Heavy‑duty 1200D waterproof fabric
- Soft cotton interior cushions impacts
- Oversized fit covers tires and head
- Double‑layer reinforcement with wind‑proof seal
- Reflective strips for day/night visibility
Cons
- Slightly heavier than thin covers
- Requires occasional strap tightening
- May need extra storage space when folded
2. Mionovity 1200D Log Splitter Cover
The Mionovity 1200D Waterproof Heavy‑Duty Wood Splitter Cover is engineered to shield your log splitter from the toughest weather.
Crafted from rugged 1200D polyester Oxford fabric with an inner PU coating, it offers superior waterproofing, UV resistance, and tear‑proof durability, extending the life of machines ranging from 15‑ to 45‑ton gas or electric models. Its generous dimensions—up to 89″L × 45″W × 39″H—cover the entire splitter, including tires, and fit popular brands such as Oregon, Troy‑Bilt, MTD, and Huskee.
A reinforced double‑layer front with a magic‑tape closure creates a tight seal that battles gusty winds, while the upgraded head design resists wear from constant use.
Adjustable elastic hems, reinforced tension panels, and strap systems on the back and bottom lock the cover in place, preventing it from blowing away. Integrated vent holes promote airflow, stopping condensation from pooling, and high‑visibility reflective strips add safety during low‑light conditions.
Pros
- 1200D tear‑resistant polyester fabric
- Fully waterproof with PU inner coating
- Fits 15‑45 ton splitters, full‑size coverage
- Double‑layer front with magic‑tape seal
- Adjustable straps resist strong winds
Cons
- Slightly heavier than thin covers
- Requires occasional strap tightening
1. YHINGG WS-83 Log Splitter Cover
The YHINGG Log Splitter Cover is built to keep your 15‑45 ton gas or electric splitter safe from the elements all year long.
Crafted from upgraded, heavyweight Oxford cloth, this cover is substantially thicker than standard options, delivering up to one year of reliable protection versus the typical six‑month lifespan of lighter fabrics.
Its generous dimensions—83″ × 45″ × 39″—fit most mid‑size splitters, while the fully waterproof, tear‑resistant material shields against rain, snow, and UV exposure.
A secure drawstring at the base and sturdy buckles at the front and rear lock the cover in place, preventing it from flapping or blowing away in high winds.
An intelligently placed vent on the back allows moisture to escape, reducing condensation and the risk of rust on internal components. Whether the splitter sits idle in a woodshed or out on a rugged job site, this cover maintains a pristine condition, extending the life of your investment.
Pros
- Heavy‑duty Oxford fabric, year‑long protection
- Exact fit for 15‑45 ton splitters
- Fully waterproof and tear‑resistant
- Drawstring & buckles secure against wind
- Vent prevents condensation and rust
Cons
- Slightly heavier than ultra‑light covers
- Requires occasional tightening of drawstring
- Not suitable for splitters larger than 45 tons
Frequently Asked Questions
What makes a log splitter cover truly waterproof?
A genuinely waterproof cover uses high‑density, UV‑stabilized polyethylene or PVC with sealed seams and welded edges. Look for:
- Water‑proof rating (e.g., 1,000 mm water column or higher)
- Seam tape or welded seams that prevent water ingress
- Gusseted or reinforced corners to keep the cover taut when it rains
These features keep rain, snow, and dew from reaching the splitter’s motor and hydraulic components, extending the machine’s lifespan.
Which waterproof log splitter cover offers the best protection for the price?
The DurableShield 12‑Foot Heavy‑Duty Cover consistently ranks top‑rated for value:
- Material: 600 D polyester with a 300 D PU coating (waterproof, UV‑resistant)
- Features: Double‑stitched reinforced corners, elastic draw‑cords, and a built‑in vent to prevent condensation buildup
- Price range: $45‑$55, making it affordable while still meeting commercial‑grade standards
Users report that it sheds water effectively and stays securely in place even on windy days.
How do I properly install and maintain a waterproof log splitter cover?
- Clear the area – Remove debris, leaves, and any loose parts around the splitter.
- Center the cover – Lay the cover over the splitter, ensuring the vent opening aligns with the machine’s air intake.
- Secure the edges – Use the elastic draw‑cords or tie‑downs to pull the cover snugly; this prevents water from pooling.
- Check seams regularly – Look for tears or worn stitching; re‑seal with waterproof tape if needed.
- Clean after storms – Brush off mud and rinse with a hose; let it dry completely before storage to avoid mildew.
Conclusion
Investing in a high‑quality waterproof log splitter cover pays dividends in durability, safety, and efficiency, protecting both your equipment and the surrounding area from the elements.
By prioritizing features such as robust material construction, reliable sealing, and thoughtful design elements like ventilation and easy access, you ensure your splitter stays dry, rust‑free, and ready for heavy use year after year.
Choosing a cover that balances affordability with long‑term resilience also reduces maintenance costs and downtime, letting you focus on the work at hand.
Ultimately, the right cover safeguards your investment, extends the life of your splitter, and keeps your outdoor workspace functional in any weather.
